Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add filters








Language
Year range
1.
Acta odontol. latinoam ; 35(2): 98-104, Sept. 2022. graf
Article in English | LILACS-Express | LILACS | ID: biblio-1403030

ABSTRACT

ABSTRACT The aim of this study was to evaluate tooth color in dental students at the University of Buenos Aires, Argentina. The participants were 184 students (157 women and 27 men) aged 21 to 33 years, mean age 24.45 (SD 2.79) years, who were in the fourth year of their dental degree. They agreed to participate through an informed consent. Exclusion criteria were: having undergone a bleaching treatment within the previous six months, presence of total or partial peripheral restoration, pigmentations, fracture, carious and non-carious lesions or absence of the right upper central incisor (1.1). A dental prophylaxis procedure was performed on the buccal surface of each 1.1 tooth with a prophylaxis brush (TDV) mounted on a low-speed rotary instrument Kavo 2068 CHC (Germany) micromotor and a Kavo LUX K201(Germany) contra-angle. Shade was measured in the middle third of each 1.1 tooth, by the same observer, using a VITA Easyshade V spectrophotometer (Zahnfabrikn Bad Säckingen, Germany), which was calibrated before each determination according to manufacturer's instructions, in the same dental unit (Sino S2316), with natural illumination, in the same time slot, without using the dental unit lamp. The results were recorded in an ad-hoc form and rates and confidence interval were obtained. Shade prevalence percentages (95% CI) were: A1: 46.2 (38.83 - 53.68); followed by A2 and B2, both with 17.39 (12.21 - 23.66); A3: 6.52 (3.41-11.11); B1: 4.35 (1.9-8.39); D2: 2.72 (0.89 - 6.23); B3: 2.17 (0.60-5.47) and C2: 1.09 (0.13-3.87); D3, C3, A3.5 and A4: 0.54 (0.01-2.99). Shades D1 and C1 were not determined in any subject. Within the conditions of this study, A1 was the most prevalent shade in central incisors, followed by A2 and B2.


RESUMEN El objetivo de este estudio fue evaluar la prevalencia de color dental en estudiantes de odontología de la Universidad de Buenos Aires (UBA). Los participantes fueron 184 estudiantes de cuarto año de la carrera de Odontología (157 mujeres y 27 hombres) de entre veintiuno y treinta tres años, con un promedio de edad de 24,45 (DE 2,79) años que aceptaron participar mediante consentimiento informado. Criterios de exclusión: quienes hayan recibido blanqueamiento en los últimos seis meses, tenían una restauración periférica total o parcial, pigmentaciones, fractura, lesiones cariosas y/o no cariosas en el incisivo central superior derecho (1.1) o éste estaba ausente. Se realizó profilaxis dental en la superficie bucal de cada 1.1 con un cepillo ad-hoc (TDV) montado en un micromotor de baja velocidad Kavo 2068 CHC (Alemania) y un contra-ángulo Kavo LUX K201 (Alemania). La medición del color se llevó a cabo en el tercio medio de cada 1.1, por el mismo observador, en la misma clínica dental, con iluminación natural en la misma franja horaria y sin utilizar la lámpara del equipo dental. Se utilizó un espectrofotómetro VITA Easyshade V (Zahnfabrikn Bad Säckingen, Alemania) que se calibró antes de cada determinación de acuerdo con las instrucciones del fabricante. Los resultados se registraron en una planilla ad-hoc y se obtuvieron tasas e intervalos de confianza. Prevalencia de colores % (IC 95%): A1: 46,2 (38,83 - 53,68), seguido de A2 y B2 ambos con 17,39 (12,21 - 23,66), A3: 6,52 (3,41-11,11), B1: 4,35 ( 1,9- 8,39), D2: 2,72 (0,89 - 6,23), B3: 2,17 (0,60-5,47) y C2: 1,09 (0,13- 3,87); D3, C3, A3.5 y A4: 0.54 (0.01-2.99) D1 y C1 no se determinaron en ningún sujeto. Dentro de las condiciones de este estudio A1 fue el color más prevalente en los incisivos centrales de estudiantes de odontología, seguido de A2 y B2.

2.
Acta odontol. latinoam ; 34(2): 113-118, June 2021. graf
Article in English | LILACS-Express | LILACS | ID: biblio-1339034

ABSTRACT

ABSTRACT The aim of this study was to analyze the dimensions of the clinical crown of upper central incisors and the prevalence of tooth shapes by two different protocols. Assessment was performed on each of the 111 dental stone type V maxillae models of students of dentistry from Buenos Aires University [93 females and 18 males, mean age 23.70 (± 2.26) years] The mesial and distal-vestibular angles were defined on each right upper incisor, and the following segments were defined: AB (zenith - incisal edge), CD, EF, GH (apical, middle, and incisal thirds - vestibule - mesial and vestibule-distal angles) and their lengths were determined with a precision caliper. Then, the CD/AB, EF/AB and mean CD-EF/AB ratios were calculated. Shapes were assessed by four independent observers, three of whom evaluated digital images of the models, while the fourth had no access to the images, and determined the shapes using an algorithm developed from the dimensions of the studied segments. Rates and confidence intervals were determined, and Fleiss' Kappa was calculated to assess the agreement among the evaluators who worked with the images and among all of them. Average incisor length was 10 mm, and widths at CD and EF were 7.35 mm (0.65) and 8.27 mm (0.58), respectively. Regarding shapes, 51.58% (47.90-55.20) of the incisors were identified as square, 18.02% (14.50-21.90) as ovoid and 30.41% (30.00-30.90) as triangular. Fleiss' Kappa agreement was 0.71 (0.62-0.80). The application of the proposed algorithm provided a considerable level of agreement among the observers. Regarding tooth size, both the average segment length and the proportions were similar to those reported by various authors.


RESUMEN El objetivo de este trabajo fue analizar las dimensiones de las coronas clínicas de incisivos centrales superiores, y la prevalencia de cada una de las formas dentarias según diferentes formas de determinación. Se utilizaron modelos de yeso tipo V de 111 estudiantes (93 mujeres y 18 varones) con una media de edad de 23,70 (± 2,26) años. Se definieron los ángulos vestíbulo - mesial y distal para los incisivos centrales superiores derechos (1.1), se definieron los siguientes segmentos: AB (cenit - borde incisal), CD, EF, GH (tercios apical, medio e incisal - ángulos vestíbulo - mesial y vestíbulo- distal) y se determinaron sus longitudes con un calibre de precisión. Se calcularon las proporciones CD/AB, EF/AB y media CDEF/ AB. Las formas de las piezas dentarias fueron identificadas por cuatro observadores independientes, tres lo hicieron mediante la evaluación de imágenes digitales de los modelos confeccionados. El cuarto observador, sin acceso a las imágenes, asignó a cada pieza una de las formas determinadas mediante la aplicación de un algoritmo elaborado ad-hoc. Se obtuvieron tasas e intervalos de confianza y se calculó Kappa de Fleiss para valorar la concordancia entre evaluadores. La longitud promedio fue de 10 mm y el ancho en los segmentos CD y EF fueron de 7.35 mm (0.65) y 8.27 mm (0.58) respectivamente. En cuanto a formas el 51,58% (47.90-55.20) de los incisivos estudiados fueron identificados como cuadrados, el 18.02% (14.50-21.90) como ovoides y el 30,41% (30.00-30.90) triangulares. La concordancia de Kappa de Fleiss fue de 0.71 (0.62-0.80). La aplicación del algoritmo propuesto alcanzó un nivel de concordancia considerable entre los evaluadores. En cuanto al tamaño dentario, tanto la longitud promedio de los segmentos estudiados como las proporciones halladas son similares a las reportadas por diversos autores.

3.
Acta odontol. latinoam ; 34(2): 143-148, June 2021. graf
Article in English | LILACS-Express | LILACS | ID: biblio-1339038

ABSTRACT

ABSTRACT The aim of this study was to evaluate the amount of radiating energy transmitted through lithium disilicate discs of different thicknesses and opacities with different curing units (CU). Discshaped specimens 8 mm in diameter and 1.5 mm or 0.7 mm thick were designed with Zbrush® and Cura 3D® software, milled from HT and MO IPS e-maxCAD blocks (Ivoclar Vivadent) with Ceramill Mikro 4 (Amann Girrbach, Austria) and processed according to manufacturer instructions. Thickness was checked with a Mitutoyo (México) caliper. Four groups (n=4) were formed: G1(HT/1.5 mm), G2(MO/1.5 mm), G3(HT/0.7 mm) y G4(MO/0.7 mm), and the effect of three CUs: Coltolux (Coltene- Whaledent), LED.C, (Woodpecker Medical Instrument Co.Ltd) and Deepcure L(3M-ESPE) was tested Measurements were taken with a halogen and LED radiometer (Woodpecker® LM-1-Guilin Woodpecker Medical Instrument Co.Ltd) after applying the guide of each CU directly on the reading window (d) and after interposing each of the specimens. The ratio of transmitted energy was determined in each case and data was analyzed with repeated measures ANOVA and Tukey test for multiple comparisons. LED.C: d:1600 mW/cm2, G1: 0.31(0.00), G2: 0.14(0.00) G3: 0.54(0.01), G4: 0.38(0.01); Deepcure L: d:1500 mW/cm2, G1: 0.34(0.01), G2: 0.20(0,00), G3: 0.56(0.01), G4: 0.41(0.02); Coltolux: d:1275 mW/cm2, G1: 0.44(0.01), G2: 0.24(0,00), G3: 0.65(0.01), G4: 0.47(0,00). Statistically significant differences were found among the curing units (P<0.001) and for the interaction CU-thickness (P<0.001) and CU-opacity (P=0.023). Within the conditions of this study, the ratio of light transmitted through lithium disilicate structures is related to their thickness and opacity, and to the curing unit employed.


RESUMEN Uno de los factores relacionados con éxito de las restauraciones y prótesis de cerámica de matriz vítrea es el logro de una fijación adhesiva para lo cual la correcta polimerización del medio de fijación es un requisito fundamental. El objetivo de este trabajo fue valorar la transmitancia de una cerámica a base de disilicato de litio de diferentes opacidades y espesores, con distintas unidades de curado. Probetas con forma de discos de 8mm de diámetro y dos diferentes espesores (1.5 mm y 0.7 mm) fueron diseñadas con Zbrush® y Cura 3D®, maquinadas a partir de bloques HT y MO de IPS e-maxCAD (Ivoclar Vivadent) con Ceramill Mikro 4 (Amann Girrbach, Austria) y procesadas según instrucciones del fabricante. Se obtuvieron cuatro grupos (n=4): G1(HT/1.5 mm), G2(MO/1.5 mm), G3(HT/0.7 mm) y G4(MO/0.7 mm),los espesores se controlaron con un calibre (Mitutoyo, México). A continuación, se registró la irradiancia con cada una de las unidades de curado (UC) Coltolux (Coltene- Whaledent) LED.C, (Woodpecker Medical Instrument Co.Ltd) y Deepcure L(3M-ESPE), aplicadas sobre la ventana de un radiómetro (Halogen and led radiometer Woodpecker® LM-1-Guilin Woodpecker Medical Instrument Co.Ltd) en forma directa (d), y luego de interponer los diferentes especímenes y se calculó la proporción de energía transmitida en cada caso. Los datos se analizaron con ANOVA de medidas repetidas y prueba de Tukey para las comparaciones múltiples. LED.C: d:1600 mw/ cm2, HT/0,7mm: 0,54(0,01), HT/1,5mm:0,31(0); MO/0,7mm: 0,38(0,01), MO/1,5mm: 0,14(0,00); Deepcure L: d:1500 mW/ cm2, HT/0,7 mm: 0,56(0,01), HT/1,5 mm: 0,34(0,01), MO/0,7 mm: 0,41(0,02), MO/1,5 mm: 0,20(0,00); Coltolux: d:1275 mw/ cm2, HT/0,7 mm:0,65 (0,01), HT/1,5 mm:0,44(0,01), MO/0,7 mm: 0,47(0,00), MO/1,5mm: 0,24(0,00). Se encontraron diferencias estadísticamente significativas entre las diferentes unidades de curado (P<0,001), y en la interacción unidades de curado-espesor (P<0,001) y unidades de curado-opacidad (P=0,023). La proporción de energía luminosa transmitida por una estructura de cerámica de disilicato de litio depende del espesor y opacidad de la restauración y de la unidad de curado utilizada.

4.
Acta odontol. latinoam ; 33(3): 195-199, Dec. 2020. graf
Article in English | LILACS | ID: biblio-1278204

ABSTRACT

ABSTRACT The removal of tissues affected by caries lesions is one of the mostfrequentprocedures in daily dental practice. The aim ofthis study was to collect information about the habits of members of the academic and non-academic dental community in Argentina regarding the use and conditioning of burs employed in the removal of dentin during the treatment of carious lesions. A 14-item questionnaire was prepared, and once validated in small groups, it was sent to three lists of dental subscribers through the computer services area of the School of Dentistry, University of Buenos Aires, Argentina (FOUBA). By the deadline for receiving responses, which was set as four weeks after the sending date, 294 replies were received. Results: percentage (95%CI): 47.93% (42.18-53.68%) of the respondents were faculty members, of whom 37.24% (31.68-42.81%) claimed to belong to FOUBA. Of the respondents, 26.90% (21.79-32.00%) reported being under 35 years old, 37.59% (32.01-43.16%) 36 to 45 years old, 22.07% (17.30-26.84%) 46 to 55 years and 11.38% (7.72-15.03%) over 55 years. Regarding bur type, 68.07% (62.31%-73.44%) claimed to use round burs to remove carious dentin and 27.72% (22.60%-23.31%) round + others. Regarding rotary speed, 22.07% (17.30-26.84%) use medium speed, 32.76% (27.36-38.16%) use high speed, and 32.76% (27.36-38.16%) use medium + super high. Only 17.93% (13.5222.35%) indicated that they know how to quantify the number of times they use their burs, while 50.34% (44.59-56.10%) of the respondents said that they use burs "until they no longer cut", 23.79% (18.89-28.69%) use them 1 to 5 times. 98.27% (96.77-99.77%) said they clean their burs once used. When the answers regarding the use of rubber dam were compared with area of specialization (Chi-square), it was found that faculty members mention the use of burs under rubber dam always or almost always 74.82% (67.60-82.04%) while outside the academic field, 51.01% (42.98-59.03%) of dentists say that they never or almost never do so (p <0.001). Conclusion: Most respondents state that they sterilize their rotary instruments in some way after use. About half of them do not keep track of the number of uses and use burs "until they no longer cut".


RESUMEN La eliminación de los tejidos afectados por las lesiones de caries es uno de los procedimientos más realizados en la práctica diaria de la odontología. El objetivo de este estudio fue recolectar información acerca de los hábitos de miembros de la comunidad odontológica de la Argentina en cuanto a la selección, utilización y acondicionamiento de fresas para la remoción de dentina en el tratamiento de lesiones cariosas. Se elaboró un cuestionario de 14 reactivos que fue validado en pequeños grupos. Una vez definido el formato final se lo envió a tres listas de suscriptores odontólogos a través del de área de Informática de la Facultad de Odontología de la Universidad de Buenos Aires (FOUBA). El plazo para la recepción de respuestas se estableció en cuatro semanas luego del cual se obtuvieron 294 réplicas. Resultados: porcentaje (IC95%), el 47,93% (42,18-53,68%) eran docentes, de los cuales el 37,24% (31,68-42,81%) afirmó ser docente de la UBA. El 26,90% (21,79-32,00%) refirió tener menos de 35 años, el 37,59% (32,01-43,16%) entre 36y 45 años, el 22,07% (17,30-26,84%) entre 46 y 55 años y el 11,38% (7,72-15,03%) más de 55 años. El 68,07% (62,31%-73,44%) afirmó utilizar fresas redondas y el 27,72% (22,60%-23,31%) redondas + otras. En cuanto a la velocidad utilizada: media velocidad: 22,07% (17,30-26,84%), superalta: 32,76% (27,3638,16%), media + superalta: 32,76% (27,36-38,16%). Sólo el 17,93% (13,52-22,35%) indicó que sabe cuantificar la cantidad de usos que les dan a sus fresas, en tanto que el 50,34% (44,5956,10%) de los consultados afirmó que utiliza las fresas "hasta que no corten más", el 23,79% (18,89-28,69%) le da entre 1 y 5 usos. El 98,27% (96,77-99,77%) afirmó que limpia sus fresas una vez utilizadas. Cuando se contrastaron las respuestas respecto al uso de aislamiento con el área de desempeño (Chi-cuadrado) se encontró que los docentes refieren utilizar las fresas con aislamiento absoluto siempre o casi siempre 74,82% (67,60-82,04%) mientras que fuera del ámbito académico el 51,01% (42,98-59,03%) respondieron que nunca ó casi nunca lo hacen (p < 0,001). Conclusión: la mayoría afirma que acondiciona de alguna manera el instrumental rotatorio luego de su uso, alrededor de la mitad no lleva registro del número de usos y sostiene que utiliza las fresas "hasta que no cortan más".


Subject(s)
Adult , Humans , Middle Aged , Dental Cavity Preparation , Dental Instruments , Dentin , Dentists , Argentina , Self Report , Habits
SELECTION OF CITATIONS
SEARCH DETAIL